Cerca elétrica Insulators
Insulador de garras de PP INS609B 19.7g Insuladores de vedação elétricos de postes de madeira para fio poliéster de 6 mm
Product Overview The INS609B is a compact wood post claw insulator for conductors up to 6 mm. Made from tough PP/PE, it grips wire, poly wire and poly rope without letting them creep, and its light 19.7 g body suits fences that are strung, stripped and re-strung through the year. The slim claw ...
Isolador de Garra INS608B 30,2g Isoladores de Cerca Elétrica para Poste de Madeira para Fio de Polietileno de 9mm
Product Overview The INS608B is a wood post claw insulator sized for thicker conductors up to 9 mm. The claw wraps the wire so it cannot slip down the post, while the impact-resistant PE body takes the knocks of daily farm use. At 30.2 g it adds little load to timber posts even over long runs. Key ...
Anel Isolador INS460B 45,3g M6X22CM Isoladores para Cercas Elétricas para Parafuso de Rosca Longa
Product Overview The INS460B long thread offset ring insulator holds a conductor well clear of the post with a total length of 275 mm. A 5.8 mm galvanized steel easy screw carries a 75 mm thread and the plastic head is 60 mm long, so the ring stays rigid under tension. Wire, poly wire and poly rope ...
Isolador de Anel de Rosca Longa INS058B 150mm 40g Isoladores para Cerca Elétrica para Parafuso de Offset de 55mm
Product Overview The INS058B long thread ring insulator gives a conductor a 150 mm offset from the post. Its 5.8 mm galvanized steel easy screw has a 55 mm thread, the plastic head is 50 mm long, and the 40 g PE body is impact resistant. Wire, poly wire and poly rope run free through the ring up to ...
Insulador de deslocamento de parafuso resistente a impactos INS015B 68g Isoladores de vedação elétricos para poste de parafuso de 25 mm
Product Overview The INS015B is an impact resistant screw-in offset insulator that lifts wire, poly wire and rope clear of the post. A 6 mm galvanized steel screw with a shorter 25 mm thread holds the arm 220 mm out, and the 68 g PE body stays firm under tension. It is the shallow-thread version for ...
Insulador Offset de parafuso INS082B 62,5 g Isoladores de vedação elétricos para 25 mm Polytape 55 mm Thread Post
Product Overview The INS082B stands wire, poly wire and rope off a timber post and is built to carry wider poly tape as well. Its 6 mm galvanized steel screw has a 55 mm thread and holds the arm 220 mm out from the post, while the 62.5 g PE head takes tape around 20 to 25 mm and conductors up to 4 ...
Isolador de Canto INS560B 147g Isoladores para Cercas Elétricas em Poste de Madeira para Fita de 40mm Clipe Dupla Face
Product Overview Built for timber post corners, the INS560B steers a broad fencing tape around the turn using two clips that keep it square. A 304 stainless fastener anchors it to the post, and the 147 g shell of HDPE and galvanized steel is made for long-term outdoor lines. The paired clips stop ...
Insulador de esquina de fita de madeira INS561B 147g Isoladores elétricos de cerca para 40mm de fita de parafusos inoxidáveis
Product Overview A tape corner fitting for timber posts, the INS561B takes one run of fencing tape and holds it against the post. The 304 stainless bolt does the fixing while a lone side clip keeps the tape level as it departs. Its 147 g shell mixes HDPE with galvanized steel so it keeps holding ...
Isolador de Tensão de Extremidade Pequena em PEAD INS502B Amarelo Isoladores de Cerca Elétrica para Poste de Canto Fio de 5mm
Product Overview The INS502*B is a small HDPE end strain insulator supplied in yellow for high visibility. It brings a 5 mm conductor through the fitting and holds wire, poly wire, poly rope and poly braid up to 6 mm, making it a compact anchor for the corner or end of a fence. The HDPE body is ...
